亚洲色图10p,久久婷婷五月综合色欧美蜜芽,成人毛片无码一区二区三区,亚洲成av人在线视

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

punch machine hydraulic cylinder Sold to Nepal

Release time:2023-11-12 15:27:38 Hits: Current position: Home > News

This article mainly introduces:

Nepal hydraulic cylinder,punch machine hydraulic cylinder manufacturer,punch machine hydraulic cylinder

Nepal punch machine hydraulic cylinder

(Nepal punch machine hydraulic cylinder,produced by Hengyu Group)

punch machine hydraulic cylinder are widely used in Nepal,because of clever hydraulic energy conversion,simple structure and reliable operation,powerful torque.So our company has designed punch machine hydraulic cylinder for customers from Nepal.

Introduction to punch machine hydraulic cylinder:

Analysis of commonly used seals: The wear ring and slip ring commonly used on the punch machine hydraulic cylinder are generally made of polytetrafluoroethylene + graphite, because pure polytetrafluoroethylene is easy to produce plastic creep, which is only suitable for low pressure and low wear resistance conditions. If the sealing ring used is a composite material formed after adding graphite filler, the performance can be effectively improved, the ability to resist plastic creep is increased by 2 to 3 times, the initial deformation caused by the load is reduced by 30 to 60% : the rigidity is increased by 2 to 3 times: the dimensional stability under heat is increased by 2 times, and the hardness is increased by l0 to 15%.

The role of the punch machine hydraulic cylinder in the mold industry: the punch machine hydraulic cylinder has a variety of uses in the mold, one is that the core distance is very large, or because of the mechanism of the product, only the punch machine hydraulic cylinder is reasonable or more cost saving. Let the side core be extracted before opening the mold. Hot runner is mainly based on the product to decide, sometimes customers require the use of hot runner, the price is more expensive, but there are many benefits, you can save raw materials, shorten the molding cycle The punch machine hydraulic cylinder has an irreplaceable role in the heavy industry production process: it is mainly used in places that need to support heavy objects for a long time, and it can still support heavy objects when the oil pressure is removed, and it is safe and reliable. Can be used underwater, single action, load reversion, nut self-locking to make the load safer, especially in large projects, is easy to operate control and self-locking jack, designed with a safety pressure retaining device, built-in pressure relief valve to prevent overload, to protect the self-locking jack to facilitate safe operation. The connection of the device is connected by high pressure hose and threaded joint, which has the advantages of fast use and overcoming the shortcomings of fast traditional joint oil leakage. It is mainly used for equipment installation and toppling operation in various industries such as electric power, construction, machinery manufacturing, mining, railway bridge, shipbuilding and so on.

When the initial action of the punch machine hydraulic cylinder is slow, please check the temperature of the hydraulic system, because in the case of low temperature, the viscosity of the hydraulic oil is large and the fluidity is poor, resulting in slow action of the punch machine hydraulic cylinder. The improvement method is to replace the hydraulic oil with good viscosity temperature performance, and the oil temperature at low temperature can be increased by heater or heating by the machine itself, and the normal working oil temperature of the system should be maintained at about 40 ° C.

punch machine hydraulic cylinder abnormal sound, hysteresis phenomenon cause and elimination method: the piston rod is extended with abnormal sound and hysteresis, if the punch machine hydraulic cylinder is placed for a period of time, the punch machine hydraulic cylinder may enter the air, and the movement can be normal after dozens of repeated movements. If it still cannot be eliminated, check whether the load is aligned with the axis of the piston rod; Retracted piston rod installation helps to align the load with the piston rod. If the flow is unstable, it will also lead to abnormal movement of the piston rod. Check the relevant components of the hydraulic system.

Answers to some questions about punch machine hydraulic cylinder:

What hydraulic valve is used to control a cylinder back and forth?
Direction valve is available. Direction valve includes electromagnetic directional valve, manual directional valve, check valve, hydraulic control check valve, the specific choice of which direction valve, you need to see the use of conditions.

Why does the hydraulic cylinder not return?
For a spring return cylinder, it is possible that 1, the spring is damaged. You can check it for processing. 2, the oil in the oil path is not unloaded, causing it to be unable to reset. 3, the cylinder piston is dead, resulting in no position. For double-acting cylinders, it is possible to: 1, the spool is not reversed, or is not changed to the correct position, check whether the reversing valve is normal (and whether there is electricity). 2, the cylinder piston is dead, resulting in no position, check and treatment can be. 3, the return oil pressure is insufficient, the inlet oil is not unloaded, the operation is not smooth. For reference only.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
操逼爽片网| 。祥仔AV| 少妇一区二区网址| 91一区二区三区高清| 鸡巴好大 使劲操我| 欧美 亚洲精品首页| 小鲜肉又爽又猛又深又粗网站| 簧片国产大陆字幕在线观看| 久久逼特逼| 有码av在线观看| 嗯嗯啊啊骚视频| 草逼无码视频| 91蜜芽精品视频在线观看图片| 狠狠躁久久躁欧美黑人网站| 国产少妇欧美偷拍| 保德县| 制服丝袜-微信在线| 操我福利| 色哟哟成人精品中文字幕| 伊甸园成人在线观看网站| 中文字幕人妻熟女人妻a 片| 爱爱的视频欧美| 国产美女操美女| 色诱在线免费视频| 大鸡吧操逼爽| 日韩少妇性视频| 54狠骚操| 熟女人妻 制服丝袜 中文字幕 搜索| 看美女赤裸裸的网站在线观看| 在线午夜成人AV| 上海老熟女求操| 粉鲍嫩逼一区二区| 永吉县| 日韩在线不卡一区二区视频| 免费在线看色五月| 慈利县| 插逼视频啊啊啊要| 欧美日批视频免费看| 青青草原精品国产| 人妻熟妇国产乱码精品| 91少妇激情自慰床|