亚洲色图10p,久久婷婷五月综合色欧美蜜芽,成人毛片无码一区二区三区,亚洲成av人在线视

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

tension cylinder Sold to Brazil

Release time:2023-11-26 09:49:50 Hits: Current position: Home > News

This article mainly introduces:

Brazil hydraulic cylinder,tension cylinder manufacturer,tension cylinder

Brazil tension cylinder

(Brazil tension cylinder,produced by Hebei Hengyu company)

tension cylinder are widely used in Brazil,because of simple structure and reliable operation,excellent temperature resistance,no transmission clearance.So our company has designed tension cylinder for customers from Brazil.

Introduction to tension cylinder:

In the process of using the tension cylinder, sometimes such a problem will occur, the tension cylinder can not act immediately after the instruction of the tension cylinder action is issued, and it must be moved after a short time, or sometimes it can move and stop moving, showing that the operation is very irregular. The cause and elimination of this failure mainly include air in the oil tension cylinder. Elimination method: exhaust through the exhaust valve. Check the piston rod reciprocating parts of the sealing ring for air inhalation, if so, replace the sealing ring.

The scar on the sliding surface of the tension cylinder piston will transfer with use. Before the piston is installed, there are scars on its sliding surface, which are installed intact and untreated, and these scars will in turn scratch the inner surface of the tension cylinder wall. Therefore, before installation, these scars must be fully repaired.

The tension cylinder is mainly composed of body, piston, piston rod, tension cylinder head, tension cylinder bottom, piston rod head and related auxiliary devices. The piston divides the tension cylinder into two chambers, and moves reciprocally in the tension cylinder with the help of pressure oil. In order to improve its working effect, there is no sealing ring on the piston to eliminate internal leakage, where the piston rod passes through the tension cylinder head, due to the existence of the gap, it is easy to produce external leakage phenomenon, and the dust can enter the tension cylinder through the gap, so the sealing device and dust prevention reason are set. At the same time, in order to eliminate the influence of eccentric load on the work of the piston, all the tension cylinders must be provided with a considerable length of guide sleeve at the extended end of the piston rod. In addition, in the case of faster piston movement, the phenomenon of mechanical collision between the piston and the tension cylinder bottom and the tension cylinder head is serious, so the buffer deceleration should be set at both ends of the tension cylinder The working medium of the tension cylinder: because it works at room temperature, the ordinary oil-type hydraulic oil can be selected; tension cylinder sealing device: The use of Yx sealing ring, polyurethane (PU) and polytetrafluoroethylene (PTFE) materials combined to achieve a good sealing effect; Buffer mechanism of the tension cylinder: The buffer structure of the tension cylinder is to prevent the piston from colliding with the tension cylinder head at the end of the stroke.

When the tension cylinder is disassembled due to oil leakage and other faults, the position of the piston should be moved to any end position of the tension cylinder by applying liquid pressure. Improper tapping and sudden drop should be avoided during disassembly.

Answers to some questions about tension cylinder:

What's a minus 40 cylinder made of?
Construction with 1Cr18Ni9Ti, in low temperature conditions impact and tensile strength are very good, can withstand -100 degrees of low temperature, corrosion resistance, material price is not very high, more economic.

How to take out the diaphragm of hydraulic cylinder? The septum ring is also known as the septum sleeve, when the cylinder is too long, and does not need too much travel, add the septum sleeve, limit the stroke of the hydraulic cylinder, set on the piston rod, only contact with the guide sleeve and piston, do not cooperate with the cylinder, limit the stroke, take out the difficulty is different, need to have such a professional tool, before taking out to consult the manufacturer.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
加勒比黑白配视频激情| 操日插| 五月婷中文字幕在线看| 中文成人字幕网站| 成人黄片一级二级三级| 中文字幕一区二区日韩精品蜜臂| 日韩成人一级免费视频| 台湾熟女网站| 深夜久久麻豆| 大鸡吧操美女骚逼| 亚洲欧美中日精品髙清一区二区| 精品一区二区三区在线光看 | 精品日韩操逼逼| 一区二区三区亚洲电影| 国产骚比综合| 中文字幕AV蜜桃| 亚洲一区二区av网站| 抽插真人91| 人妻日本一区二区| 中日美精品| 涩3涩3精3品7hqq091b5k| 插鸡巴视频插到高潮| 岛国激情网| 男生和女生操网战| 日韩人妻69AV| 久久精品2019中文字幕人妻欧| 美女十八紧小视频| 奶子好大我要啊啊啊视频| 嗯嗯啊啊日在线观看| 欧美另类操大逼| 爱爱亚洲一区| 台湾省| 成人午夜你懂的| 国产白虎喷水福利| 小穴被插视频| 五月天综合久久| 真实人妻尝试3p的视频| 中韩黄色| 美女逼B| 看新加坡大鸡巴操小逼| 欧美亚洲破处|