亚洲色图10p,久久婷婷五月综合色欧美蜜芽,成人毛片无码一区二区三区,亚洲成av人在线视

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

tension cylinder Sold to Mexico

Release time:2023-11-27 15:08:14 Hits: Current position: Home > News

This article mainly introduces:

Mexico hydraulic cylinder,tension cylinder manufacturer,tension cylinder

Mexico tension cylinder

(Mexico tension cylinder,produced by Hengyu Hydraulic Co., Ltd)

tension cylinder are widely used in Mexico,because of excellent fatigue and impact resistance,no need for deceleration device,long service life.So our company has designed tension cylinder for customers from Mexico.

Introduction to tension cylinder:

The tension cylinder is mainly composed of body, piston, piston rod, tension cylinder head, tension cylinder bottom, piston rod head and related auxiliary devices. The piston divides the tension cylinder into two chambers, and moves reciprocally in the tension cylinder with the help of pressure oil. In order to improve its working effect, there is no sealing ring on the piston to eliminate internal leakage, where the piston rod passes through the tension cylinder head, due to the existence of the gap, it is easy to produce external leakage phenomenon, and the dust can enter the tension cylinder through the gap, so the sealing device and dust prevention reason are set. At the same time, in order to eliminate the influence of eccentric load on the work of the piston, all the tension cylinders must be provided with a considerable length of guide sleeve at the extended end of the piston rod. In addition, in the case of faster piston movement, the phenomenon of mechanical collision between the piston and the tension cylinder bottom and the tension cylinder head is serious, so the buffer deceleration should be set at both ends of the tension cylinder The working medium of the tension cylinder: because it works at room temperature, the ordinary oil-type hydraulic oil can be selected; tension cylinder sealing device: The use of Yx sealing ring, polyurethane (PU) and polytetrafluoroethylene (PTFE) materials combined to achieve a good sealing effect; Buffer mechanism of the tension cylinder: The buffer structure of the tension cylinder is to prevent the piston from colliding with the tension cylinder head at the end of the stroke.

The repair method of the tension cylinder: the repair of the tension cylinder must use brush plating. This is because this repair method can be carried out on site, and the repair effect is good. In this way, loading and transportation can be eliminated to shorten the repair time and improve work efficiency. In addition, the coating obtained by brush plating has good binding force and will not have obvious boundaries. Moreover, the repair surface has high hardness and good wear resistance.

If it is found that the tension cylinder lubrication is poor or the tension cylinder bore processing is abnormal, it is necessary to feedback the situation to the manufacturer, because the piston and the tension cylinder, the guide rail and the piston rod have relative movement, if the lubrication is poor or the tension cylinder bore is abnormal, it will aggravate the wear and reduce the straightness of the tension cylinder center line. In this way, when the piston works in the tension cylinder, the friction resistance will be large and small, resulting in slip or crawling. The solution is to repair and grind the tension cylinder first, and then prepare the piston according to the matching requirements, repair and grind the piston rod, and configure the guide sleeve.

The definition of the minimum stable speed refers to the minimum movement speed of the tension cylinder without crawling phenomenon when the full load is moving, it has no uniform indicator, and the tension cylinder that undertakes different work has different requirements for the minimum stable speed.

Answers to some questions about tension cylinder:

What is the thin cylinder used for?
The principle is no different from ordinary cylinders, that is, the installation space is small, the formation is small, and it is suitable for some special occasions. For example, the space is compact and the place of small travel is used.

Why are two cylinders not balanced with the balance valve?
Balancing valve is only suitable for occasions with low synchronous accuracy requirements, and proportional valves are recommended for occasions with high precision requirements.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
宁远县| 一块操国内中文字幕| 欧美激情自拍| 富马酸喹硫平片多少钱一盒| 人妻人人澡人人爽人人精品| 台湾佬www22vvvvinfo| 欧美黑人大吊操| 超碰在线玩少妇| 红桃视频亚洲一区二区三区| 簧片欧美91| 91寂寞大屁股少妇| 精品国产鲁一鲁一鲁一区二区三区| 美日韩爱爱综合一区| 极品美女被操视频在线看| 温柔的抽插视频| 99美女黄色录像| 日韩色图18p| 最新 国产 日韩 欧美| 优娜无码一区二区| 国产美女裸视频无遮挡| 日本 韩国 欧美综合| 美女插屁眼网站在线观看| 操逼国产一区| 黑人大鸡巴久久久密乳| 蜜臀成人一区二区三区黄色在线观看| 中文字幕亚洲三| 大几把插B视频| 国产精品操逼片。| 欧美刺激AA| 免费一区二区三区黄色网址| 欧美激情男人天堂| 深夜激情伍月婷婷| 烧逼逼AV| 日韩三级一区兆三区| 亚洲爱爱网站| 亚洲无码1区二区三区| 91社后入| 嗯嗯啊啊的视频网页版| 亚洲 欧美 自拍 偷拍 乱| 三级经典久久久| 广南县|