亚洲色图10p,久久婷婷五月综合色欧美蜜芽,成人毛片无码一区二区三区,亚洲成av人在线视

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

trailer hydraulic cylinder Sold to Uruguay

Release time:2023-11-12 11:06:08 Hits: Current position: Home > News

This article mainly introduces:

Uruguay hydraulic cylinder,trailer hydraulic cylinder manufacturer,trailer hydraulic cylinder

Uruguay trailer hydraulic cylinder

(Uruguay trailer hydraulic cylinder,produced by Hengyu Hydraulic Co., Ltd)

trailer hydraulic cylinder are widely used in Uruguay,because of smooth movement,high work efficiency,excellent fatigue and impact resistance.So our company has designed trailer hydraulic cylinder for customers from Uruguay.

Introduction to trailer hydraulic cylinder:

When the oil pressure of the trailer hydraulic cylinder inlet is too low to reach the specified value, the leakage situation of the relevant oil system should be checked and the leakage should be eliminated; Check the piston and piston rod seal ring for damage, aging, loose and other phenomena; Check whether the hydraulic pump and pressure valve are faulty.

The trailer hydraulic cylinder should be avoided for a long time without use, if it is indeed idle for a long time for some reason, it should also be regularly turned on for empty operation, so that its parts can be fully lubricated, so as to avoid rust on the working surface and affect the normal work in the future. (If it cannot be turned on and run, a small amount of lubricating oil can be applied on its outer surface for protection) ' The use of the trailer hydraulic cylinder should pay attention to: the operation should be as far away from the trailer hydraulic cylinder as possible, to avoid falling objects, knocking, rubbing the trailer hydraulic cylinder coating. When cleaning the trailer hydraulic cylinder, only use soft materials (such as cotton) to wipe, and do not scratch high-hardness materials. Do not use the trailer hydraulic cylinder when the oil temperature exceeds 70 ° C.

The trailer hydraulic cylinder is mainly composed of body, piston, piston rod, trailer hydraulic cylinder head, trailer hydraulic cylinder bottom, piston rod head and related auxiliary devices. The piston divides the trailer hydraulic cylinder into two chambers, and moves reciprocally in the trailer hydraulic cylinder with the help of pressure oil. In order to improve its working effect, there is no sealing ring on the piston to eliminate internal leakage, where the piston rod passes through the trailer hydraulic cylinder head, due to the existence of the gap, it is easy to produce external leakage phenomenon, and the dust can enter the trailer hydraulic cylinder through the gap, so the sealing device and dust prevention reason are set. At the same time, in order to eliminate the influence of eccentric load on the work of the piston, all the trailer hydraulic cylinders must be provided with a considerable length of guide sleeve at the extended end of the piston rod. In addition, in the case of faster piston movement, the phenomenon of mechanical collision between the piston and the trailer hydraulic cylinder bottom and the trailer hydraulic cylinder head is serious, so the buffer deceleration should be set at both ends of the trailer hydraulic cylinder The working medium of the trailer hydraulic cylinder: because it works at room temperature, the ordinary oil-type hydraulic oil can be selected; trailer hydraulic cylinder sealing device: The use of Yx sealing ring, polyurethane (PU) and polytetrafluoroethylene (PTFE) materials combined to achieve a good sealing effect; Buffer mechanism of the trailer hydraulic cylinder: The buffer structure of the trailer hydraulic cylinder is to prevent the piston from colliding with the trailer hydraulic cylinder head at the end of the stroke.

The definition of the minimum starting pressure of the trailer hydraulic cylinder refers to the minimum working pressure of the trailer hydraulic cylinder in the no-load state, which is a comprehensive index reflecting the manufacturing and assembly accuracy of the trailer hydraulic cylinder parts and the size of the sealing friction.

Answers to some questions about trailer hydraulic cylinder:

When the cylinder is tested, why can't the pressure be maintained with the balance valve?
Because the oil into the oil chamber through the hydraulic lock on the control oil circuit through the other side of the spool, the original valve is designed in this way. It locks the circuit after the oil supply circuit loses pressure, on the contrary, if you keep supplying pressure, it is always in the state of opening the other side of the one-way spool. So this valve can't be used in the test.

How does the hydraulic solenoid valve realize that the cylinder stops at any position?
Use an O-type medium function solenoid directional valve, or use a Y-type solenoid directional valve and a hydraulically controlled check valve.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
欧美极品操逼| 在线免费观看一区不卡中文日本视频| 美女被操出水视频在线观看| AV一本道一区二区三区| 操老姨骚逼逼1区2区| 欧美大鸡巴日逼逼| 亚洲av1区2区在线观看| 后入大黑牛91| 色 婷婷 五月 国产| 中国女人操逼美国大鸡巴| 又黄又硬激情视频| 亚洲超碰福利导航日本| 人妻丝袜制服诱惑中文| 欧美熟妇成人久久久久久| 欧美操大屄| 扎囊县| 九九热欧美精品| 性视频欧美动漫| 精品淫妇欢乐| 美女的白虎逼被超出逼水网站| 操四川BB娇小BB痒BB| 北岛玲淫乱视频| 操逼视频在线观看啊啊啊| 国产口爆二区专场| 亚洲一级成人av| 爱爱欧美久久| 东北美女操大逼| 操BAV高清视频| 日韩黄色XXXXX| 美女被网站噜噜噜| 亚洲图区偷拍自拍| 国产一级AV免费不卡| 午夜福利免费亚洲| 好了av第三页| 韩国av大尺度啊啊啊在线观看| 青青草,黄色电影| 久久亚洲美女,二,三,区| 日韩鸡巴视频在线观看| 亚洲欧美日韩一区二区三区丝袜熟女| 国产成人午夜精品一区| 欧美美女另类操逼|