亚洲色图10p,久久婷婷五月综合色欧美蜜芽,成人毛片无码一区二区三区,亚洲成av人在线视

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

jacking hydraulic cylinder Sold to S.Africa

Release time:2023-11-12 14:24:26 Hits: Current position: Home > News

This article mainly introduces:

S.Africa hydraulic cylinder,jacking hydraulic cylinder manufacturer,jacking hydraulic cylinder

S.Africa jacking hydraulic cylinder

(S.Africa jacking hydraulic cylinder,produced by Hengyu Hydraulic Co., Ltd)

jacking hydraulic cylinder are widely used in S.Africa,because of high work efficiency,excellent fatigue and impact resistance,no need for deceleration device.So our company has designed jacking hydraulic cylinder for customers from S.Africa.

Introduction to jacking hydraulic cylinder:

How to repair the jacking hydraulic cylinder body when it is damaged: When the jacking hydraulic cylinder has trace deformation and shallow tensile marks, the jacking hydraulic cylinder is repaired by strong honing process. The heavy honing process can repair jacking hydraulic cylinders up to 2.5 times out of tolerance than the original tolerance. It honed the parts with excessive size or shape error through a powerful honing machine, so that the overall size, shape tolerance and roughness of the jacking hydraulic cylinder can meet the technical requirements.

The jacking hydraulic cylinder pipe should not be left behind when deburring at both ends after the fixed length processing. In addition, the placement of steel pipes near the site of welding pipeline operations is the cause of welding foreign objects. The pipes placed near the welding operation site should be sealed. It must also be noted that pipe fitting materials should be fully prepared on a dust-free workbench.

Protection of the jacking hydraulic cylinder surface: During the dismantling process, safety protection should be carried out on the jacking hydraulic cylinder to prevent objects from falling and welding slag from falling to the surface, causing damage to the jacking hydraulic cylinder surface. In the process of propulsion, the damaged pipe segments should be prevented from falling and smashing, and the slurry remaining on the surface of the jacking hydraulic cylinder should be cleaned up in time.

When the jacking hydraulic cylinder is installed, the piston and the jacking hydraulic cylinder head and other parts have large mass, large size and large inertia, even if there is a lifting equipment auxiliary installation, because the specified clearance is small, no matter how hard it will be put into, therefore, the end of the piston or the jacking hydraulic cylinder head boss is easy to cause scars when it hits the inner surface of the jacking hydraulic cylinder wall. The solution to this problem: for a large number of small products, the use of autocratic assembly oriented tools during installation; For heavy, thick and large large and medium-sized jacking hydraulic cylinders, only careful and careful operation can be avoided.

Answers to some questions about jacking hydraulic cylinder:

What are the differences between hydraulic cylinder and pneumatic cylinder, what are their advantages and disadvantages?
Hydraulic Cylinder: small body and large force, constant speed and variable speed (easy to change), the adjustment of output is also convenient, and the degree of freedom of transmission is high. However, maintenance costs and installation costs are high, and there is the trouble of mild oil pollution. Pneumatic Cylinder: easy to control, low price, easy access to energy. But the force is small, and can not achieve the effect of stable speed. The gas-liquid pressurized cylinder has the advantages of both of the above: environmental protection and energy saving, easy control, and simple adjustment. However, the output of the trip has certain restrictions, so it is more suitable for short trips, large output, but also environmental protection and energy saving and low configuration of the occasion. Because the pressure used in the pneumatic system is generally in the range of 0.2-1.0Mpa, the cylinder is not suitable for high power component.

Why does the cylinder pop out of itself when it stops?
This situation has two possibilities, 1. There is more air in the system, so exhaust the gas. 2. The back pressure of the oil return is relatively large, check the oil return filter, check whether the cylinder has a rod cavity buffer is too tight, and choose a 3-position 4-way M-type valve for the reversing valve. In addition, after the shutdown, manually change the reversing valve back and forth several times, it should not rise out.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
视频一区二区三区四区五五六区| 奉节县| 亚洲成人女同一区| 日朝黄色一级片| 大黑鸡巴日韩国美女| 经典国产三级视频| 福利视频三区欧美| 亚洲色AV综合| 激情三级高清久久| 人人艹视频| 内射操逼视频| 被操哭视频在线| 国产西区二区在线| 色美女亭亭| 日韩无码91| chinese 自拍偷拍| 日本美女网站18禁| 日女逼逼| 淫妇骚穴视频| 日本熟女内射| 曰欧美一级| 91人妻区一起草| av男人专区| 手机大香蕉在线视频| 婷婷香蕉在线| 卡一卡二卡三卡四卡五卡六视频免费看| 大黑逼逼视频| www.骚逼逼.com| 日本人大香蕉伊| www.国产黄色自拍.com| 色操频| 狠狠熟女亚洲| 色婷婷五月密| 亚洲欧美日韩伦理视频一区| 成人高清视频免费观看| 亞洲伊人av| 狠狠综合一| 午夜福利片国产一二三 | 夫妻大鸡巴91| 男生爆操女生免费视频网站| 男女操B大全裸B视频|