亚洲色图10p,久久婷婷五月综合色欧美蜜芽,成人毛片无码一区二区三区,亚洲成av人在线视

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

servo hydraulic cylinder Sold to Vietnam

Release time:2023-11-07 17:47:59 Hits: Current position: Home > News

This article mainly introduces:

Vietnam hydraulic cylinder,servo hydraulic cylinder manufacturer,servo hydraulic cylinder

Vietnam servo hydraulic cylinder

(Vietnam servo hydraulic cylinder,produced by Hengyu Group)

servo hydraulic cylinder are widely used in Vietnam,because of powerful torque,clever hydraulic energy conversion,simple structure and reliable operation.So our company has designed servo hydraulic cylinder for customers from Vietnam.

Introduction to servo hydraulic cylinder:

Do not enter foreign bodies when installing the servo hydraulic cylinder block. The place where the installation operation is carried out, the conditions are not good, and foreign bodies can be entered unconsciously. Therefore, the installation site must be cleaned up around, especially the place where the parts are placed must be cleaned, so that there is no dirt.

In recent years, the processing process of the servo hydraulic cylinder generally adopts the rolling method, which is a pressure finishing processing, which uses the cold plastic characteristics of the metal at room temperature, and uses the rolling tool to exert a certain pressure on the surface of the workpiece, so that the surface metal of the workpiece produces plastic flow, and fills in the low concave trough of the original residue, and the roughness value of the workpiece surface is reduced. Due to the plastic deformation of the rolled surface metal, the surface tissue is cold hardened and the grain is fine, forming a dense fiber, and forming a residual stress layer, and the hardness and strength are increased, thus improving the wear resistance, corrosion resistance and compatibility of the workpiece surface. Rolling is a plastic machining method without cutting.

The servo hydraulic cylinder is not the same as the servo hydraulic cylinder, because the pressure of the pneumatic system is generally within the range of 0.2-1.0Mpa, the servo hydraulic cylinder can not be used as a high-power power component, but the servo hydraulic cylinder can be used as a relatively large power component, or the servo hydraulic cylinder system can be used.

If the servo hydraulic cylinder slips or crawls, please check whether there is astringency inside the servo hydraulic cylinder, because the internal parts of the servo hydraulic cylinder are improperly assembled, the parts are deformed, worn or the shape and position tolerance is excessive, the action resistance is too large, so that the piston speed of the servo hydraulic cylinder changes with the different stroke position, and the slip or crawl occurs. Most of the reasons are due to poor assembly quality of parts, surface scars or sintered iron filings, so that the resistance increases, the speed decreases. For example, the piston is different from the piston rod or the piston rod is bent, the servo hydraulic cylinder or the piston rod is offset from the mounting position of the guide rail, and the sealing ring is too tight or too loose. The solution is to repair or adjust, replace damaged parts and remove iron filings.

Answers to some questions about servo hydraulic cylinder:

What are the functions of hydraulic cylinders?
Hydraulic cylinder is a hydraulic actuator, the specific role depends on the installation occasion and the type of hydraulic cylinder. Hydraulic cylinder is mainly used in machinery, and it is the most important component of construction machinery. It is important core component which mainly provide power for machinery.

Are hydraulic cylinders divided into oil cylinders and water cylinders? What's the difference between the two types?
There are oil cylinders and water cylinders. The two cylinders are used in different environments. Oil cylinders are generally used in places where there is less demand for media, which is our most common hydraulic cylinders. Water cylinders are mainly used for large tonnage presses. Because the equipment is too large, the use of hydraulic oil will cause a relatively large waste. However, water is not pure water, there are oil-in-water emulsion and water-in-oil emulsion. Water has another benefit: it's flame retardant. It is especially suitable for some flammable and explosive occasions. Or with water glycol. The use of pure water is very little, mainly because the seal is not good and easy to rust.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
粉嫩白虎被操| 大鸡巴操丰满 美女| 白丝被爆操视频播放在线观看的人| 大香蕉精品视频在线播放| 美国日韩一级| 欧美日韩尻逼| 麻豆一卡二卡在线观看| 蜜臀99久久精品久久久久久宅男| 美女扒开尿口被人插久久| av天堂亚洲热| 会同县| 五月婷婷的奶子| 欧美中文字幕视频大全一区二区| 亚洲AV女生极品一区二区三区三州长| 日本大鸡巴插骚逼| 人妻中文永久性丝袜| 日韩有码视频在线看| 丝袜美女av一二区| 偷拍自拍激情视频| 国产视频a| av一区二区三区在线无码| 操熟女少妇视频| 精品一区二区叼嘿视频| 精品亚洲第一第二| 1区2区3区在线观看日韩| 美日韩操B小视频| 日本一区二区视频在线| 色屁屁一区二区三区一| 日本视频·一区二区| 欧美日本熟妇爽| 国产视频第一区| 黄片一级黄片二级xxx| 午夜福利视频链接| 日本一区不卡二三区| 博客| 日逼不卡| 哪里可以看国产小夫妻自拍三级片| 色日国产| 操老熟妇骚逼高潮| 天天干物夜夜操| 91蜜桃传媒精品久久久一区二区|